Overview

CA-880T Switched Power Sequencer | An 80 A input and per-channel voltage monitoring together: bringing order and readable data to centralized power in large venues.

Power risks in large systems come from both ends: inrush surges on one side, voltage anomalies on the other. CA-880Tkeeps both in check with second-order π-type filtering and per-channel voltage display — orderly start-up, readable operation.

Key Features | Sequenced Switching

8 independent power outputs sharing the same logic of sequenced power-on and reverse-order power-off; the front-panel sequencing master switch works with the eight manual buttons, and each channel can be controlled separately, so a faulty device can be cut out on its own during an emergency without affecting the whole show.

Key Features | Independent Channel Management

A sequencing master switch and eight manual buttons on the front panel, with an independent LED real-time voltage display on every channel at ±2% accuracy; an alarm is triggered automatically when voltage deviates 20V from the set value, so the supply status of each channel is visible without extra metering.

Key Features | Linked Expansion

RS485 linking supports up to 16 units online at once, with the master unit monitoring slave status in real time and raising alarms; an RS232 port is also provided for connection to a control system, enabling one-touch start/stop and remote management.

Safety & Protection | Filtering and Protection in tandem

A built-in second-order π-type EMC filter, combined with a single-phase 80A air circuit breaker with overcurrent and short-circuit protection; a maximum total capacity of 17 kVA suits clusters of high-power amplifiers.

Construction & Craftsmanship: 2U solid chassis, Central power hub

The 2U chassis (88 mm) offers generous internal space, leaving layout headroom for the second-order filter and the voltage-monitoring circuitry; it installs in a standard 19-inch rack and suits rack and suits fixed-install centralized power cabinets.

Operating Environment

Supports dual-range 110 VAC / 220 VAC input at 50/60 Hz, designed for the long continuous duty cycles of fixed venue installations.

Technical Specification

Input Voltage

  • 110 VAC / 220 VAC (dual range)

Input Phase

  • Single-phase

Mains Input Frequency

  • 50 Hz / 60 Hz

Input Air Circuit Breaker

  • Single-phase 80A

Maximum Power Handling

  • 110 VAC=8.5 kVA
    220 VAC=17 kVA

Input Connectors

  • Direct wiring to the air circuit breaker

Output Channels

  • 8-channel (relay-controlled)

Output Connector Types

  • Power sockets

Maximum Output Current per Channel

  • 10A max

Max. Power per Channel

  • 110 VAC=1,100 kVA
    220 VAC=2,200 kVA

Status Indicators

  • Real-time display (per-channel LED)

OVP / UVP Alarm

  • Alarm when voltage deviates 20 V from the set value

Sequencing Logic

  • Sequential power-on and reverse-order power-off at preset intervals

Sequence Interval

  • 1 step / second

Panel Control

  • Sequencing master switch + 8 manual control buttons

Independent Channel Switching

  • Supported

Master On/Off Function

  • Supported

Cascading Methods

  • RS485

Linking Cable

  • XLR

Maximum Linkable Units

  • Up to 16 units (master/slave linked control)

EMC Filter

  • Second-order π-type

Overcurrent Protection

  • Supported

Short-Circuit Protection

  • Supported

Cooling System

  • Natural convection cooling

Installation

  • 19-inch standard rack (rack ears)

Finish material

  • One-piece formed sheet-metal housing with precision surface coating

Operating Temperature

  • 0°-40℃

Net Weight

  • 3.6 kg (7.9 lbs)

Dimensions (W x H x D) mm

  • 440x88(2U)x424 mm
    (17.3"x3.4"x16.6")

Product Code

  • 10621573020680

Contact Us

Fields marked with (*) are required.