CA-863T Switched Power Sequencer | Occupying just 1U, it governs the power-up and power-down order of a whole rack, so every start-up of a conference or performance system proceeds in an orderly manner.
When multiple devices are powered up at the same time, mains surges and switch-on pops are almost unavoidable. CA-863Tswitches the outputs on one after another at preset intervals and cuts them off in reverse order at power-down, turning the professional practice of "sources and processors first, power amplifiers last" into a single action that protects amplifiers, processors and mixing consoles at the source. The front panel provides a sequencing master switch and eight manual control buttons: every channel can be switched on or off independently, with its status shown in real time, so a faulty channel can be cut out on its own during an emergency without affecting the whole show.
Key Features | Sequenced Switching
8 independent power outputs sharing the same logic of sequenced power-on and reverse-order power-off; the front-panel sequencing master switch works with the eight manual buttons, and each channel can be controlled separately, so a faulty device can be cut out on its own during an emergency without affecting the whole show.
Key Features | Independent Channel Management
The front panel is fitted with a sequencing master switch, eight manual control buttons and LED status indicators that make on/off status recognizable at a glance; maximum output current per channel is 10 A, and maximum total capacity of the unit is 15 kVA.
Key Features | Linked Expansion
RS485 linking is supported, with up to 16 units connectable for master/slave linked control; the master unit monitors slave status in real time and raises an alarm automatically if a slave is disconnected or changed, so a multi-rack system can be sequenced as one.
Safety & Protection | High-Power Capacity
A built-in first-order π-type EMC filter, combined with a single-phase 63 A air circuit breaker with overcurrent and short-circuit protection, suppresses mains noise and isolates abnormal currents.
Construction & Craftsmanship: 1U compact chassis for every scenario
Aircraft-grade aluminum-magnesium alloy housing with a baked paint finish: rugged, durable and interference-resistant. The 1U chassis takes up only 44.4 mm of height and installs in a standard 19-inch rack — ideal for space-constrained conference and touring equipment racks.
Operating Environment
Supports dual-range 110 VAC / 220 VAC input at 50/60 Hz and an operating temperature of 0 °C–40 °C, making it suitable for both fixed installations and touring performances at home and abroad.