RX15

RX15

Functional overview

Sound source
RX15 is a high performance two tone frequency loudspeaker, built-in a 15" bass unit and a 3" tweeter unit, provides different audio-frequency for various fixed installation of sound applications. Convenient built-in frequency divider and large horn design can provide precise mode control. The direction of 80° x 50° (H x V) provides an outstanding coverage angle for many occasions, the maximum sound pressure can reach 135 dB. Because their extended frequency response is 18 kHz , RX15 can be used as a full-frequency system, and also used as a three-frequency system with REYN AUDIO subwoofer, such as RS118 / RS121. The shell is made of high-density birch board, the front side is equipped with hard wire mesh and black PCP (polyurea cabinet protection) paint finish. It has the function of anti-impact and anti-weather. The unit is supported in the middle of the box by a high precision metal material and metal parts, so that the box can be reliably protected. Equipped with hangers which can be installed horizontally and vertically at multiple angles, while with rigging which can be supported and suspended at a single point. The connection panel on the back side is embedded and equipped with Speakon NLT4 M socket. RX15 is suitable for theatres, clubs, DISCO PUB, music clubs, performance halls, music bars, high-end KTV, nightclubs, etc.


Features

  • RX15 is a two tone frequency division loudspeaker system with built-in passive voice divider. The B&C HF driver is imported from Italy, used to ensure quality stability and accord with various quality tests. Operational frequency is 18 kHz , HF driver uses high frequency 3-inch vibration film, 80x50 degrees directivity, high frequency remote projection can be strong and penetrating, with high efficiency single 15 inch low sound unit, with excellent remote projection and fax degree.
  • Multi-angle streamlined design is adopted in front of the steel mesh, which can effectively enhance the bearing capacity of the steel mesh to strong sound waves and avoid physical abnormal sounds. The shell is made of high-density birch board and with black PU wear-resistant paint. It has the functions of waterproof, moisture-proof, sun-proof and collision-proof, can perfectly protects the speaker's body. It can cooperate with the exclusive overhang frame to make the installation more fast & convenient, greatly improve work efficiency.
  • RX15 is suitable for theatres, clubs, disco pub, music clubs, performing halls, music bars, high-end KTV, nightclubs, etc. If cooperate with RS118 / RS121 subwoofer can become a three tone frequency division system.

Technical & Specification

System data

  • Frequency range:50Hz-18kHz,-3dB (passive crossover)
  • Maximum output sound pressure level : LF:133.5dB; HF:135dB
  • Sensitivity(1W/1m):LF:99dB; HF:108.5dB

Loudspeaker data

  • Rated power(AES):LF:700W; HF:110W
  • Program power:LF:1400W; HF:220W
  • Nominal impedance:8Ω
  • LF unit:15"(3.5"Voice Coil)
  • HF unit: 3" (Compression driver )
  • Horizontal spreading angle: 80°
  • Vertical spreading angle: 50°
  • Connection index:1+/1-(INPUT),2+/2-(Link)
  • Connectors:2xNeutrik NL-4MPR

Dimensions / weight

  • Finish material:Black PU abrasive-resistant paint
  • Cabinet dimension(WxHxD)mm:432x685.5x386mm
  • Net Weight : 28Kg

Dimensions

Downloads